Network Working Group J. Rosenberg
Request for Comments: 3858 dynamicsoft
Category: Standards Track August 2004
An Extensible Markup Language (XML) Based Format for Watcher
Information
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2004).
Abstract
Watchers are defined as entities that request (i.e., subscribe to)
information about a resource. There is fairly complex state
associated with these subscriptions. The union of the state for all
subscriptions to a particular resource is called the watcher
information for that resource. This state is dynamic, changing as
subscribers come and go. As a result, it is possible, and indeed
useful, to subscribe to the watcher information for a particular
resource. In order to enable this, a format is needed to describe
the state of watchers on a resource. This specification describes an
Extensible Markup Language (XML) document format for such state.
Table of Contents
1. Introduction ................................................ 2
2. Terminology ............................................... 2
3. Structure of Watcher Information ........................... 2
4. Computing Watcher Lists from the Document .................. 5
5. Example .................................................... 6
6. XML Schema ................................................. 6
7. Security Considerations .................................... 8
8. IANA Considerations ........................................ 9
8.1. application/watcherinfo+xml MIME Registration ......... 9
8.2. URN Sub-Namespace Registration for
urn:ietf:params:xml:ns:watcherinfo .................... 10
9. Normative References ....................................... 10
10. Informative References ..................................... 11
Rosenberg Standards Track [Page 1]
RFC 3858 Watcher Info August 2004
11. Acknowledgements ........................................... 11
12. Contributors ............................................... 12
13. Author's Address ........................................... 13
14. Full Copyright Statement ................................... 14
1. Introduction
Watchers are defined as entities that request (i.e., subscribe to)
information about a resource, using the SIP event framework, RFC 3265
[1]. There is fairly complex state associated with these
subscriptions. This state includes the identity of the subscriber,
the state of the subscription, and so on. The union of the state for
all subscriptions to a particular resource is called the watcher
information for that resource. This state is dynamic, changing as
subscribers come and go. As a result, it is possible, and indeed
useful, to subscribe to the watcher information for a particular
resource. An important application of this is the ability for a user
to find out the set of subscribers to their presentity [11]. This
would allow the user to provide an authorization decision for the
subscription.
To support subscriptions to watcher information, two components are
needed. The first is the definition of a SIP event template-package
for watcher information. The other is the definition of a data
format to represent watcher information. The former is specified in
[2], and the latter is specified here.
2. Terminology
In this document, the key words "MUST", "MUST NOT", "REQUIRED",
"SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
and "OPTIONAL" are to be interpreted as described in BCP 14, RFC 2119
[3] and indicate requirement levels for compliant implementations.
This document also uses the terms subscriber, watcher, subscription,
notification, watcherinfo subscription, watcherinfo subscriber, and
watcherinfo notification with the meanings described in [2].
3. Structure of Watcher Information
Watcher information is an XML document [4] that MUST be well-formed
and SHOULD be valid. Watcher information documents MUST be based on
XML 1.0 and MUST be encoded using UTF-8. This specification makes
use of XML namespaces for identifying watcherinfo documents and
document fragments. The namespace URI for elements defined by this
specification is a URN [5], using the namespace identifier 'ietf'
defined by [6] and extended by [7]. This URN is:
Rosenberg Standards Track [Page 2]
RFC 3858 Watcher Info August 2004
urn:ietf:params:xml:ns:watcherinfo
A watcher information document begins with the root element tag
"watcherinfo". It consists of any number of "watcher-list" sub-
elements, each of which is a list of watchers for a particular
resource. Other elements from different namespaces MAY be present
for the purposes of extensibility; elements or attributes from
unknown namespaces MUST be ignored. There are two attributes
associated with the "watcherinfo" element, both of which MUST be
present:
version: This attribute allows the recipient of watcherinfo documents
to properly order them. Versions start at 0, and increment by one
for each new document sent to a watcherinfo subscriber. Versions
are scoped within a watcherinfo subscription. Versions MUST be
representable using a 32 bit integer. However, versions do not
wrap.
state: This attribute indicates whether the document contains
the full watcherinfo state, or whether it contains only
information on those watchers which have changed since the
previous document (partial).
Each "watcher-list" element contains a list of "watcher" elements,
each of which describes a watcher on a particular resource. Other
elements from different namespaces MAY be present for the purposes of
extensibility; elements or attributes from unknown namespaces MUST be
ignored. There are two attributes associated with the "watcher-list"
element, both of which MUST be present:
resource: This attribute contains a URI for the resource being
watched by that list of watchers. It is mandatory.
package: This attribute contains a token indicating the event
package for which watcher information on that resource is being
provided. It is mandatory.
The "watcher" element describes a watcher in the watcher list. The
value of the "watcher" element is a URI for the watcher. This URI
SHOULD be the authenticated identity of the watcher as determined by
the server processing the subscription. As such, this URI will
usually be an address-of-record (for example, sip:joe@example.com) as
opposed to a device address (for example, sip:joe@192.0.2.3). There
are three mandatory attributes which MUST be present:
Rosenberg Standards Track [Page 3]
RFC 3858 Watcher Info August 2004
id: A unique identifier for the subscription described by the
watcher element. The id MUST be representable using the grammar
for token as specified by RFC 3261 [8]. It MUST be unique across
all other watchers reported in documents sent in notifications for
a particular watcherinfo subscription.
status: The status of the subscription. The meaning of the
various statuses are defined in the watcher information event
package [2].
event: The event which caused the transition to the current
status. The events are defined in the watcher information event
package [2].
There are also some optional, informative attributes of the watcher
element. These are:
display-name: A textual representation of the name of the
subscriber.
expiration: The amount of time, in seconds from the current
time, that the subscription will expire.
duration-subscribed: The amount of time, expressed in seconds,
between the time the SUBSCRIBE which created the subscription was
received, and the current time.
The xml:lang attribute MAY be used with the "watcher" element to
specify the language of the "display-name".
The number of watchers present for each resource, and the set of
resources listed, depends on the type of data being provided, and to
whom.
For example, consider a presence system using watcher information. In
one scenario, a user, A, subscribes to the presence of another user,
B. A would like to find out about the status of their subscription.
To do so, A subscribes to the watcher information for B's presence.
A does not have authorization to learn the status of all watchers for
B's presence. As a result, the watcher information sent to A will
contain only one watcher - A themself.
In another scenario, a user, B, wishes to learn the set of people who
have subscribed to B's presence. To do this, B subscribes to the
watcher information for B's presence. Here, B is authorized to see
all the watchers of B's presence. As a result, the watcher
information sent to B will contain all watchers of B's presence.
Rosenberg Standards Track [Page 4]
RFC 3858 Watcher Info August 2004
In the case where an administrator wishes to learn the current status
in the system, the watcher information could contain all watchers for
all resources.
4. Computing Watcher Lists from the Document
Typically, the watcherinfo NOTIFY will only contain information about
those watchers whose state has changed. To construct a coherent view
of the total state of all watchers, a watcherinfo subscriber will
need to combine NOTIFYs received over time. The watcherinfo
subscriber maintains a table for each watcher list it receives
information about. Each watcher list is uniquely identified by the
URI in the "resource" attribute of the "watcher-list" element. Each
table contains a row for each watcher in that watcher list. Each row
is indexed by the unique ID for that watcher. It is conveyed in the
"id" attribute of the "watcher" element. The contents of each row
contain the state of that watcher as conveyed in the "watcher"
element. The tables are also associated with a version number. The
version number MUST be initialized with the value of the "version"
attribute from the "watcherinfo" element in the first document
received. Each time a new document is received, the value of the
local version number, and the "version" attribute in the new
document, are compared. If the value in the new document is one
higher than the local version number, the local version number is
increased by one, and the document is processed. If the value in the
document is more than one higher than the local version number, the
local version number is set to the value in the new document, the
document is processed, and the watcherinfo subscriber SHOULD generate
a refresh request to trigger a full state notification. If the value
in the document is less than the local version, the document is
discarded without processing.
The processing of the watcherinfo document depends on whether it
contains full or partial state. If it contains full state, indicated
by the value of the "state" attribute in the "watcherinfo" element,
the contents of all tables associated with this watcherinfo
subscription are flushed. They are re-populated from the document.
A new table is created for each "watcher-list" element, and a new row
in each table is created for each "watcher" element. If the
watcherinfo contains partial state, as indicated by the value of the
"state" attribute in the "watcherinfo" element, the document is used
to update the existing tables. For each "watcher-list" element, the
watcherinfo subscriber checks to see if a table exists for that list.
This check is done by comparing the URI in the "resource" attribute
of the "watcher-list" element with the URI associated with the table.
If a table doesn't exist for that list, one is created. For each
"watcher" element in the list, the watcherinfo subscriber checks to
see whether a row exists for that watcher. This check is done by
Rosenberg Standards Track [Page 5]
RFC 3858 Watcher Info August 2004
comparing the ID in the "id" attribute of the "watcher" element with
the ID associated with the row. If the watcher doesn't exist in the
table, a row is added, and its state is set to the information from
that "watcher" element. If the watcher does exist, its state is
updated to be the information from that "watcher" element. If a row
is updated or created, such that its state is now terminated, that
entry MAY be removed from the table at any time.
5. Example
The following is an example of watcher information for a presentity,
who is a professor. There are two watchers, userA and userB.
<?xml version="1.0"?>
<watcherinfo xmlns="urn:ietf:params:xml:ns:watcherinfo"
version="0" state="full">
<watcher-list resource="sip:professor@example.net" package="presence">
<watcher status="active"
id="8ajksjda7s"
duration-subscribed="509"
event="approved" >sip:userA@example.net</watcher>
<watcher status="pending"
id="hh8juja87s997-ass7"
display-name="Mr. Subscriber"
event="subscribe">sip:userB@example.org</watcher>
</watcher-list>
</watcherinfo>
6. XML Schema
The following is the schema definition of the watcherinfo document
format:
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:ietf:params:xml:ns:watcherinfo"
xmlns:tns="urn:ietf:params:xml:ns:watcherinfo" >
<!-- This import brings in the XML language attribute xml:lang-->
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/03/xml.xsd" />
<xs:element name="watcherinfo">
<xs:complexType>
<xs:sequence>
<xs:element ref="tns:watcher-list" minOccurs="0"
maxOccurs="unbounded"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="version" type="xs:nonNegativeInteger"
Rosenberg Standards Track [Page 6]
RFC 3858 Watcher Info August 2004
use="required"/>
<xs:attribute name="state" use="required">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:enumeration value="full"/>
<xs:enumeration value="partial"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
</xs:element>
<xs:element name="watcher-list">
<xs:complexType>
<xs:sequence>
<xs:element ref="tns:watcher" minOccurs="0" maxOccurs=
"unbounded"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="resource" type="xs:anyURI" use="required"/>
<xs:attribute name="package" type="xs:string" use="required"/>
</xs:complexType>
</xs:element>
<xs:element name="watcher">
<xs:complexType>
<xs:simpleContent>
<xs:extension base="xs:anyURI">
<xs:attribute name="display-name" type="xs:string"/>
<xs:attribute name="status" use="required">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:enumeration value="pending"/>
<xs:enumeration value="active"/>
<xs:enumeration value="waiting"/>
<xs:enumeration value="terminated"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
<xs:attribute name="event" use="required">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:enumeration value="subscribe"/>
<xs:enumeration value="approved"/>
<xs:enumeration value="deactivated"/>
<xs:enumeration value="probation"/>
<xs:enumeration value="rejected"/>
<xs:enumeration value="timeout"/>
<xs:enumeration value="giveup"/>
Rosenberg Standards Track [Page 7]
RFC 3858 Watcher Info August 2004
<xs:enumeration value="noresource"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
<xs:attribute name="expiration" type="xs:unsignedLong"/>
<xs:attribute name="id" type="xs:string" use="required"/>
<xs:attribute name="duration-subscribed"
type="xs:unsignedLong"/>
<xs:attribute ref="xml:lang"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:element>
</xs:schema>
7. Security Considerations
Watcher information is sensitive information. The protocol used to
distribute it SHOULD ensure privacy, message integrity, and
authentication. Furthermore, the protocol should provide access
controls which restrict who can see who elses watcher information.
8. IANA Considerations
This document registers a new MIME type, application/watcherinfo+xml,
and registers a new XML namespace.
8.1. application/watcherinfo+xml MIME Registration
MIME media type name: application
MIME subtype name: watcherinfo+xml
Mandatory parameters: none
Optional parameters: Same as charset parameter application/xml
as specified in RFC 3023 [9].
Encoding considerations: Same as encoding considerations of
application/xml as specified in RFC 3023 [9].
Security considerations: See Section 10 of RFC 3023 [9] and
Section 7 of this specification.
Interoperability considerations: none.
Published specification: This document.
Rosenberg Standards Track [Page 8]
RFC 3858 Watcher Info August 2004
Applications which use this media type: This document type has
been used to support subscriber authorization functions for
SIP-based presence [10] [2].
Additional Information:
Magic Number: None
File Extension: .wif or .xml
Macintosh file type code: "TEXT"
Personal and email address for further information: Jonathan
Rosenberg, <jdrosen@jdrosen.net>
Intended usage: COMMON
Author/Change controller: The IETF.
8.2. URN Sub-Namespace Registration for
urn:ietf:params:xml:ns:watcherinfo
This section registers a new XML namespace, as per the guidelines in
[7].
URI: The URI for this namespace is
urn:ietf:params:xml:ns:watcherinfo.
Registrant Contact: IETF, SIMPLE working group,
<simple@ietf.org>, Jonathan Rosenberg
<jdrosen@jdrosen.net>.
XML:
BEGIN
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
"http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="content-type"
content="text/html;charset=iso-8859-1"/>
<title>Watcher Information Namespace</title>
</head>
<body>
<h1>Namespace for Watcher Information</h1>
<h2>urn:ietf:params:xml:ns:watcherinfo</h2>
<p>See <a href="ftp://ftp.rfc-editor.org/in-notes/rfc3858.txt">
RFC3858</a>.</p>
Rosenberg Standards Track [Page 9]
RFC 3858 Watcher Info August 2004
</body>
</html>
END
9. Normative References
[1] Roach, A. B., "Session Initiation Protocol (SIP)-Specific Event
Notification", RFC 3265, June 2002.
[2] Rosenberg, J., "A Watcher Information Event Template-Package for
the Session Initiation Protocol (SIP)", RFC 3857, August 2004.
[3] Bradner, S., "Key Words for Use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[4] T. Bray, J. Paoli, and C. M. Sperberg-McQueen, "Extensible
Markup language (XML) 1.0 (second edition)," W3C Recommendation
REC-xml-20001006, World Wide Web Consortium (W3C), Oct. 2000.
Available at http://www.w3.org/XML/.
[5] Moats, R., "URN Syntax", RFC 2141, May 1997.
[6] Moats, R., "A URN Namespace for IETF Documents", RFC 2648,
August 1999.
[7] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January
2004.
[8] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP:
Session Initiation Protocol", RFC 3261, June 2002.
[9] Murata, M., Laurent, S., and D. Kohn, "XML Media Types", RFC
3023, January 2001.
[10] Rosenberg, J., "A Presence Event Package for the Session
Initiation Protocol (SIP)", RFC 3856, August 2004.
10. Informative References
[11] Day, M., Rosenberg, J., and H. Sugano, "A Model for Presence and
Instant Messaging", RFC 2778, February 2000.
11. Acknowledgements
The authors would like to thank Sean Olson, Steve Donovan, and Cullen
Jennings for their detailed comments and assistance with the XML
schema.
Rosenberg Standards Track [Page 10]
RFC 3858 Watcher Info August 2004
12. Contributors
The following people were part of the original design team that
developed the first version of this specification:
Dean Willis
dynamicsoft
5100 Tennyson Parkway, Suite 1200
Plano, Texas 75024
EMail: dwillis@dynamicsoft.com
Robert Sparks
dynamicsoft
5100 Tennyson Parkway, Suite 1200
Plano, Texas 75024
EMail: rsparks@dynamicsoft.com
Ben Campbell
EMail: ben@nostrum.com
Henning Schulzrinne
Columbia University
M/S 0401
1214 Amsterdam Ave.
New York, NY 10027-7003
EMail: schulzrinne@cs.columbia.edu
Jonathan Lennox
Columbia University
M/S 0401
1214 Amsterdam Ave.
New York, NY 10027-7003
EMail: lennox@cs.columbia.edu
Christian Huitema
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
EMail: huitema@microsoft.com
Rosenberg Standards Track [Page 11]
RFC 3858 Watcher Info August 2004
Bernard Aboba
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
EMail: bernarda@microsoft.com
David Gurle
Reuters Corporation
EMail: David.Gurle@reuters.com
Jonathan Lennox contributed the text for the DTD and its usage that
were part of earlier versions of this specification.
13. Author's Address
Jonathan Rosenberg
dynamicsoft
600 Lanidex Plaza
Parsippany, NJ 07054
EMail: jdrosen@dynamicsoft.com
Rosenberg Standards Track [Page 12]
RFC 3858 Watcher Info August 2004
14. Full Copyright Statement
Copyright (C) The Internet Society (2004). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Rosenberg Standards Track [Page 13]
|
